The Uni MagMount has a permanent VHB adhesive to place the
mag-mount on any smooth, flat, solid surface as desired. The 2 inch mag stem stiffly flexes slightly to adjust the tilt angle of the mounted device as desired.
The Uni MagMount base measures 2" x 1.75". Two thin steel backer plates for smartphone, and one large backer plate for tablets are included.
Place the Uni MagMount firmly on a clean, dry surface and allow set to cure for at least 48 hours before use. Full curing in 72 hours. Like any MobileMount Solutions mag-mount, it will instantly and securely mount any mag-ready smartphone or tablet up to 20oz. Any size mag-ready smartphone, tablet or GPS device can be attached and removed instantly with one hand.
Be sure the sub-surface the Uni is mounted on will itself not pull apart. Placing on plain drywall paper will peel off the top layer causing the unit to fail. Do not overload the UNI. We have it rated to handle 20oz when the attachment is properly bonded to a solid subsurface.
Each corner of the Uni MagMount base is countersunk with 4 optional screws included. Though optional, if added base security is desired, the screws can be screwed into the subsurface with a phillips screwdriver for added assurance.
Scenarios for a Uni MagMount include:
It's not magic, it's MobileMount Solutions.
©2015 MobileMount Solutions Inc.